Sealants and Foam

< Back

Useful Information

Choice of sealant

  • TOT-MS 20

  • TOT-MS 35

  • CONSTRUCCIÓN

  • UNIVERSAL

  • ALU-SIL

  • SANI-SELL

  • PLUS

  • MULTIUSOS

  • TOT-BRID 30

  • A-20

  • A-40

  • R-70

  • S-50

  • S-100

  • Recommended

  • Suitable in most cases.
    Consult us.

  • Not usable.

IMPORTANT

The sealant used in each application
particularly should be chosen carefully in
Depending on the nature of the supports,
expected movements of the joint and
Aque environmental conditions will
subjected to obtain the maximum guarantee
and sealing time.
The following table is a guide, not exhaustive,
of the main applications of our
sealants. does not relieve our customers of
perform tests to
check the suitability of each
sealant for a particular application.

Yield per cartridge sealants Collak

Width (mm)

Depth (mm)

5 6 8 10 12 14 16 18 20 22 25
5 12 10 7.5 6 · · · · · · ·
6 10 8.3 6.2 5 4.1 3.5 · · · · ·
7 · · 5.3 4.2 3.5 3 2.6 · · · ·
8 · · 4.6 3.7 3.1 2.6 2.3 2 1.8 1.6 ·
9 · · · 3.3 2.7 2.3 1.8 1.6 1.5 1.3 ·
10 · · · 3 2.5 2.1 1.8 1.6 1.5 1.3 ·
11 · · · · 2.2 1.9 1.7 1.5 1.3 1.2 1
12 · · · · 2 1.7 1.5 1.3 1.2 1.1 1

Important

In the table shows the yields
length in meters of a square section
or rectangular.
The consumption figures indicated in this table are
theoretical, ie the values ​​represented
apply for section joints perfectly
square or rectangular and without shrinkage
normally produced during application.